Frameless Velcro License Plate Holder | Alti Giri

Alti Giri Premium Frameless Velcro License Plate Holder (Set)

Give your car or motorcycle a sleek, modern upgrade with the Alti Giri Frameless Velcro License Plate Holder. Say goodbye to thick plastic dealer frames and ugly screws ruining your bumper. With this premium self-adhesive velcro set, you can mount your license plates completely invisibly, perfectly straight, and flush against the bodywork.

Whether you drive a sports car, want a clean "tuned" look, or simply love minimalist design: this is the most subtle and secure solution on the market.

Why choose the Alti Giri License Plate Holder?

• 100% Invisible mounting: The ultra-thin design ensures your license plate sits perfectly flush against the vehicle.
• Extremely strong adhesion: The special, heat- and weather-resistant hot-melt rubber adhesive stays rock-solid under all conditions — even at high highway speeds, in freezing temperatures, or during a car wash.
• Universal & flexible: Suitable for almost all standard (and 3D) license plates with a length between 360 mm and 520 mm.
• No drilling required: Completely screwless installation keeps your bumper or tailgate undamaged.
• Residue-free removal: If you ever need to remove the strips, they can be taken off cleanly (by heating them with a hairdryer) without leaving adhesive residue or paint damage.

What's in the box?

• 2x Wide velcro strips: Equipped with an industrial-grade, self-adhesive backing (suitable for one vehicle).
• 1x Premium red squeegee / plastic tool: To press the strips down seamlessly without air bubbles and to easily detach the velcro when needed.
• 2x Cleaning wipes (alcohol pads): For thoroughly degreasing the surface before application.
• 1x Premium AG KLETT packaging: Featuring clear installation instructions printed on the back.

Easy 4-step installation:

1. Clean: Thoroughly clean and degrease the bumper and the back of the license plate using the provided alcohol pads.
2. Stick: Apply the self-adhesive strips to both the vehicle and the back of the license plate.
3. Press: Use the included red squeegee to press the strips down firmly and evenly.
4. Attach: Press the license plate firmly onto the velcro strip on the vehicle. Tip: For the best results, let the adhesive cure for 24 hours before driving.